
Private plane company airports
Private plane company airports shape every quote you will compare this year. Miami-Opa Locka has the longest runway of the group at 8,002 feet, with Van Nuys just one foot behind. Each field changes the jets that can fly and the estimates you receive.
- Main page
- Airfields
The private plane company airports that matter most sit close to dense city centers rather than at big commercial hubs. Teterboro, Van Nuys, Miami-Opa Locka and Chicago Midway each give a charter broker a different set of runway, elevation and density-altitude conditions to work with. The numbers below are the ones that decide whether a light jet, a midsize or a heavy jet can leave with a full cabin on a hot afternoon.
Runway length is only half the story. Elevation and summer heat raise density altitude, and that figure shrinks the margin every aircraft needs at rotation. A field at 8 feet above sea level and one at 802 feet behave nothing alike in July, even when their runways look similar on paper. Charter prices quoted by any private plane company are estimates, so treat the ranges here as planning tools rather than final invoices.
Teterboro Airport
- KTEB code
- 9 ft field height
2 runways; longest is 6,997 ft. 0 miles to New York. FBO: Jet Aviation, Signature Aviation East, Atlantic Aviation, Signature Aviation West.

Van Nuys Airport
- KVNY code
- 802 ft field height
2 runways; longest is 8,001 ft. 0 miles to New York. FBO: Signature Aviation (West), Signature Aviation VNY North, Jet Aviation Van Nuys, The Park VNY.

Miami-Opa Locka Executive Airport
- KOPF code
- 8 ft field height
3 runways; longest is 8,002 ft. 0 miles to New York. FBO: Atlantic Aviation, Signature Aviation, Jet Aviation, Fontainebleau Aviation.

Chicago Midway International Airport
- KMDW code
- 620 ft field height
4 runways; longest is 6,522 ft. 0 miles to New York. FBO: Atlantic Aviation, Signature Aviation.

Runway and elevation figures by airport
Each airport pairs a long runway with a density-altitude peak that tests different aircraft classes. Teterboro sits at just 9 feet of elevation with a 6,997-foot runway, yet its peak density altitude reaches 2,300 feet. Van Nuys starts at 802 feet and climbs to a peak of 3,800 feet, which matters for a light jet on a warm afternoon. Miami-Opa Locka runs 8,002 feet of runway at 8 feet of elevation, with a peak density altitude near 2,500 feet. Chicago Midway has the shortest runway in the group at 6,522 feet and the highest field elevation at 620 feet. If a summer departure from Midway is planned for a heavy jet at maximum fuel, then the shorter runway is the constraint the broker should check first. Peak figures reflect each airport's hottest month plus 8 F, not a fixed summer standard.
| Field | Elev | Longest rwy | To New York | Jul DA |
|---|---|---|---|---|
| Teterboro Airport | 9 ft | 6,997 ft | 0 mi | 1,700 ft |
| Van Nuys Airport | 802 ft | 8,001 ft | 0 mi | 3,200 ft |
| Miami-Opa Locka Executive Airport | 8 ft | 8,002 ft | 0 mi | 1,900 ft |
| Chicago Midway International Airport | 620 ft | 6,522 ft | 0 mi | 2,300 ft |
How summer heat changes jet choice
July density altitude climbs well above field elevation at all four airports, and that gap is the planning problem. At Van Nuys the July figure reaches 3,200 feet against a field elevation of 802 feet, a margin wide enough to cut payload on smaller jets. Teterboro's July density altitude lands at 1,700 feet, Miami-Opa Locka at 1,900 and Midway at 2,300.
If a midsize jet is scheduled out of Van Nuys in midsummer with a full cabin, then the operator may need a longer runway roll or a fuel stop that a winter flight would skip. A super-midsize or heavy jet usually absorbs the penalty better, since both cruise near 470 knots and carry more margin. When an August trip from Midway involves a turboprop, then the 6,522-foot runway and warmer air together narrow the useful load. Ask any private plane company for the density-altitude figure it used before you compare quotes.
Questions
Which private plane company airports have the longest runways?
Miami-Opa Locka leads with an 8,002-foot runway, and Van Nuys is a close second at 8,001 feet. Teterboro offers 6,997 feet and Chicago Midway 6,522 feet. The difference of a few hundred feet matters most for heavy jets leaving on hot days with full fuel and a full cabin. A heavy jet at maximum weight needs every foot of runway, so the shorter field often forces a fuel stop or a lighter load.
Does elevation affect flights out of Van Nuys?
Yes. Van Nuys sits at 802 feet, and its peak density altitude reaches 3,800 feet. A light jet with a typical range of 1,400 nautical miles may lose payload on a warm afternoon. A super-midsize jet, with a range near 3,200 nautical miles, handles the same conditions with more room to spare. If your trip calls for a full cabin in July, then the super-midsize is the safer estimate to request.
What does a charter flight from these airports cost?
Light jet hourly rates run from $3,800 to $5,800, and midsize jets from $5,200 to $7,800. A New York to Miami leg of 949 nautical miles prices around $10,000 to $15,000 in a light jet. These are estimates, and final quotes depend on aircraft, date and crew. When you compare brokers, then ask each one for the aircraft class and the hourly rate behind the total.
Can heavy jets use Chicago Midway?
They can, but the 6,522-foot runway and a July density altitude near 2,300 feet combine to limit takeoff weight. Heavy jets carry 10 to 14 passengers and cruise near 470 knots, so a long trip planned from Midway may need a fuel stop. Compare a midsize option before committing to the larger aircraft. If the trip is under 2,100 nautical miles, then a midsize jet can often make the leg nonstop from Midway.
How does density altitude affect turboprops at these airports?
Turboprops cruise near 300 knots and carry 6 to 8 passengers, with hourly rates from $2,200 to $3,500. At Midway, a July density altitude of 2,300 feet against a field elevation of 620 feet cuts useful load on warm afternoons. If a turboprop is planned for a summer departure, then schedule it early in the morning when the air is cooler. A light jet handles the same heat with more margin.
Why do private plane company airports matter for cross-country trips?
Runway length and density altitude decide whether a jet can leave with full fuel. A New York to Los Angeles leg of 2,129 nautical miles takes about 6 hours 15 minutes in a light jet and prices around $23,500 to $36,000. If the departure field is hot and short, then the jet may need a fuel stop that adds time and cost. Checking both ends of the route before you request quotes keeps the estimates comparable.